Nhazi PCB, PCB oyiri, PCB tụgharịa

PCB mmepụta oyiri, PCB mmepụta, SMT nhazi,

Mgbakọ bọọdụ okirikiri ebipụtara na mmepụta oke

MCU Reverse, MCU Attack, IC Crack, IC deciphering

page_banner

ngwaahịa

PCB-Mgbakọ

nkowa nkenke:

PCB e ọtụtụ-eji na mmepụta nke electronic ngwaahịa.Enweghị PCB, a gaghị enwe mmepe ngwa ngwa nke ụlọ ọrụ ozi eletrọnịkị ọgbara ọhụrụ


Nkọwa ngwaahịa

Mkpado ngwaahịa

Ọrụ anyị

(1) Mmepụta nke ọma:

 PCB nwere ike ghọta njikọ eletrik dị n'etiti ihe dị iche iche dị na sekit, kama ịdị mgbagwoju anya wiring, belata ọrụ wiring n'ụzọ ọdịnala, ma mee ka ịgbado ọkụ, mgbakọ na debugging nke ngwaahịa eletrọnịkị dị mfe.

 (2) Ntụkwasị obi na miniaturization:

 A na-ebelata olu nke ngwaahịa eletrọnịkị, ọnụ ahịa ngwaahịa na-ebelata, a na-emeziwanye ntụkwasị obi na ịdị mma ngwaahịa nke ngwa eletrọnịkị.

 (3) Nhazi nhazi:

 Ọ nwere ezigbo mgbanwe nke nkeji ngwaahịa.Ọ nwere ike ịnakwere nhazi ahaziri ahazi, bụ nke na-enyere aka ịgbado ọkụ na mechanization na mmepụta automation, ma na-eme ka nrụpụta nrụpụta dị mma.

 (4) Ezi mmezi na mgbanwe:

 The components nke ngwá nwere ezi n'ibu na eletriki Njirimara, nke mere na ngwá electronic nwere ike na-aghọta mgbakọ ahịrị mmepụta, na dum biri ebi sekit osisi mgbe mgbakọ na debugging nwere ike ji mee ihe dị ka a mapụtara akụkụ, nke bụ adaba maka mgbanwe na mmezi nke. ngwaahịa dum.

 

 N'ihi na nke anọ uru n'elu PCB, PCB e ọtụtụ-eji na mmepụta nke electronic ngwaahịa.Enweghị PCB, a gaghị enwe mmepe ngwa ngwa nke ụlọ ọrụ ozi eletrọnịkị ọgbara ọhụrụ.Teknụzụ Jingbang ga-aga n'ihu na-emeziwanye usoro nrụpụta iji nye ndị ahịa ọrụ ka mma.

Nhazi PCB

IC mgbawa

Mwepu mgbawa

PCB na PCBA iṅomi

PCB na PCBA clone

PCB mgbakọ

PCBA OEM na ODM otu nkwụsị ọrụ

PCBA mapụtara/ngbanwe/akụkụ nrụzi

• Ihe karịrị ahụmahụ 10 afọ

• Karịrị ndị ọrụ R na D ọkachamara 60

• Ụlọ ọrụ 1100sq.m nke kachasị ọnụ na ụlọ ọrụ ọkachamara na mpaghara a na China

• IC mgbawa: igwe koodu na 2 sample ibe ga-nyere maka ule

• PCB/PCBA iṅomi: BOM, PCB na SCH na Protell 99SE ka a ga-enye.

• PCB/PCBA mmepụta oyiri: igwe koodu, BOM, PCB, SCH na 2 sample mbadamba ga-nyere.

A na-etinye PCBA anyị n'ọtụtụ ebe na: akụrụngwa ahụike

• Ngwá ọrụ njikwa ụlọ ọrụ

• Ngwa ngwa nzikọrịta ozi:

• Ụlọ ọrụ agha

• Ngwaahịa eletrọnịkị niile

• Dị na ahịrị 12 na ha niile nwere ike ịmepụta ngwaahịa RoHS

• Oke kachasị nke PCB igwe SMT anyị nwere ike ime: (L) 457 x (W) 356mm

• Nha kacha nta: (L) 50 x (W) 50mm/Ogo kacha nta nke QFP: 45 x 45mm

• Oghere: 0.3mm

• Nke kacha nta nke mgbawa: 0201

• Machines nwekwara ike ime BGA, CSP, LLP, na ndị ọzọ ọtụtụ pụrụ iche ngwugwu components

• Ngụkọta ikike: 10 nde ibe kwa ụbọchị (ngbanwe abụọ)

• Enwere ahịrị 10 M/I (wave soldering), atọ n'ime ha bụ maka ngwaahịa RoHS ma nwee ike gbasaa ruo ahịrị asaa.

• M/I components (dị ka axis resistor, capacitor na diode) nwere ike preformed na-akpaghị aka.

• Oke kachasị nke PCB ha nwere ike ime: (L) 550 x (W) 350mm

• Nha kacha nta: (L) 50 x (W) 35mm

• Dị na ahịrị mbufe isii na ngwọta RoHS

• Ahịrị niile nwere ike ịmepụta obere ngwaahịa dị ka MP3, MP4 Player, na ekwentị mkpanaaka

• Nyete igodo ntụgharị na ọrụ prototype


  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya